IKING Stainless Steel Self‑Adhesive Insulation Hanger Pins
Product Overview
IKING stainless steel self‑adhesive insulation pins (sticky insulation hangers) are heavy‑duty insulation fasteners specially built for corrosive, humid or outdoor working conditions. Both the perforated square base and the pin shaft are manufactured from stainless steel, delivering outstanding anti‑rust performance compared to carbon‑steel versions.
Equipped with high‑bond pressure‑sensitive adhesive backing, this self‑stick insulation fastener eliminates welding and drilling work, will not damage duct or equipment surface. The perforated base maximizes contact area with adhesive, greatly reduces risk of peeling‑off under high‑humidity conditions.
After firmly adhering the base to a clean metal substrate, place insulation material over the pins and secure with self‑locking washers to hold thermal or acoustic insulation firmly in position.
Key Features
- ✔️ Full stainless steel construction: base + pin, excellent anti‑corrosion & rust resistance
- ✔️ No welding, no drilling, no damage to original equipment surface
- ✔️ Perforated square metal base for stronger adhesive bonding
- ✔️ Heavy‑duty high‑strength adhesive backing for long‑term service
- ✔️ Fits rock wool, glass wool, mineral wool insulation materials
- ✔️ Customizable pin length to match different insulation thickness
- ✔️ Fast field installation, cuts labor time & construction cost
- ✔️ Suitable for coastal, wet, corrosive industrial environments
Technical Specifications
| Item |
Parameter |
| Brand |
IKING |
| Material |
Base: Stainless Steel; Pin: Stainless Steel |
| Base Style |
Square perforated plate |
| Adhesive |
High‑performance pressure‑sensitive self‑adhesive |
| Pin Length |
Customized based on insulation thickness |
| Matching Parts |
Self‑locking insulation washers (optional accessory) |
| Working Environment |
Indoor / coastal / humid / mildly corrosive industrial sites |
| Application |
HVAC ductwork, process tanks, equipment thermal & acoustic insulation |
Installation Guide
- Clean the target metal surface thoroughly, remove grease, dust, rust, keep surface dry.
- Peel off the release liner from the adhesive back of the perforated base.
- Press the square base firmly against the prepared surface to ensure full contact.
- Allow adequate bonding time before further assembly.
- Lay rock wool / glass wool insulation over the protruding stainless steel pins.
- Fit self‑locking washer onto each pin to compress and lock insulation layer.
- Trim excess pin length if necessary.
Typical Applications
- HVAC ventilation duct thermal and acoustic insulation
- Industrial metal tanks & vessels outer insulation
- Coastal plant equipment anti‑corrosion insulation projects
- Marine on‑board duct & equipment insulation
- Factory noise‑reduction insulation systems
- Mechanical building insulation in high‑humidity locations
IKING Service
- OEM & custom dimensions: base size, pin diameter, pin length
- Factory direct wholesale supply
- Full set insulation fastening accessories available
- Strict quality control before delivery
- Professional technical support & quotation
Packaging: Standard export carton.
